NSN 5306-01-627-4113
Coaxial Connector
Grip to head radius is 0.31min/0.41max. Diameter of surface under head is 0.500..
Manufacturer part number PBF1479-5-6A for national stock number 5306016274113.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-627-4113.
-
MPN or Model
PBF1479-5-6A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.488 inches -
Fastener Length
0.823 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
0.561 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2704 MPN LS15262V04-4Machine Screw
- 5305-01-418-9857 MPN 3M1170D3-2AFClose Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-660-9210 MPN LD111-0046-2319Close Tolerance Screw
- 5305-01-669-6598 MPN BACB30LH3-3Close Tolerance Screw
- 5305-01-670-1091 MPN 3M1170C6-9AClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-01-012-0621 MPN VAL23001-7-D038Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-627-4113 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-5-6A | Valley-todeco, Inc. |
VDC0020-5-6A | Sps Technologies, Llc |
92147-5-6A | Sps Technologies, Llc |
GB511GG5-6A | Northrop Grumman Systems Corporation |
VCD0020-5-6 | Valley-todeco, Inc. |
92147-5-6 | Sps Technologies, Llc |