NSN 5306-01-627-9848
Coaxial Connector
Between 2.679 inches and 2.709 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6607D32 for national stock number 5306016279848.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-627-9848.
-
MPN or Model
NAS6607D32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 2.679 inches and 2.709 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5305-00-001-4755 MPN NAS1020-48AHexagon Head Cap Screw
- 5305-00-026-2311 MPN NAS1352C04-9Socket Head Cap Screw
- 5305-00-035-5382 MPN NAS1581F3H11Close Tolerance Screw
- 5305-00-054-6651 MPN MS51957-27Machine Screw
- 5305-00-054-9239 MPN MS24694C97Machine Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-235-0718 MPN NAS1351C06LL4Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-627-9848 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6607D32 | National Aerospace Standards |
Stock Check
- NS: 17
- NE: 1060