NSN 5306-01-628-1504
Coaxial Connector
3.605 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: 0.439 inches .
Manufacturer part number GB511GF6-50 for national stock number 5306016281504.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-628-1504.
-
MPN or Model
GB511GF6-50
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.560 inches -
Fastener Length
3.605 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
0.439 inches -
Extended Washer Diameter
0.644 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-165-0284 MPN 85131LAircraft Structural Component Support
- 1560-00-243-4620 MPN 1128WM42057-2Fitting Assembly
- 5935-00-340-9931 MPN GA800VE24SR11Electrical Connector Backshell
- 1560-00-345-4848 MPN RAC12365-1Aircraft Fuel Tank
- 5930-00-359-4448 MPN GS835HC2-2-10Rotary Switch
- 5935-00-365-8849 MPN GC805EB128SVElectrical Receptacle Connector
- 1680-00-373-5145 MPN 89CM10212-2Bell Crank
- 1560-00-435-0307 MPN 128SB10904-1Air Duct Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-628-1504 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF6-50 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)
- NE: 5