NSN 5306-01-628-9517
Coaxial Connector
0.834 inches fastener length, double hexagon w/hole head style, between 0.265 inches and 0.285 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number VCC0090-3-8 for national stock number 5306016289517.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-628-9517.
-
MPN or Model
VCC0090-3-8
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.334 inches -
Fastener Length
0.834 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.265 inches and 0.285 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
Between 0.054 inches and 0.074 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-130-6555 MPN SC2671-3-10Machine Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5305-01-435-7929 MPN BACB30LU9-33Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-00-308-3482 MPN J643P05DMachine Bolt
- 5306-00-481-2156 MPN J644P19AMachine Bolt
- 5306-01-027-1997 MPN GB511BY4M18Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-628-9517 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCC0090-3-8 | Valley-todeco, Inc. |
AIC578-3-8 | Sps Technologies, Llc |
PBF1478-3-8 | Sps Technologies, Llc |
84725-3-8 | Sps Technologies, Llc |
GB511GF3-8 | Northrop Grumman Systems Corporation |