NSN 5306-01-629-0872
Close Tolerance Hex Head Bolt
Between 3.57 inches and 3.62 inches fastener length, double hexagon head style, 0.18 inches head height, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number ST3M453-5D17 for national stock number 5306016290872.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-629-0872.
-
MPN or Model
ST3M453-5D17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Fastener Length
Between 3.57 inches and 3.62 inches -
Head Style
Double hexagon -
Head Height
0.18 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Part Name Assigned By Controlling Agency
Bolt-shear double hex, cres -
Material
Stainless steel fastener -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-021-7936 MPN 53-34048-3Radome
- 1560-00-042-9938 MPN 32-87391-9Support Fitting
- 1560-00-125-8001 MPN 68A328102-2006Aircraft Skin
- 1560-00-137-7593 MPN 32-21179-11Bayonet Fitting
- 1560-00-173-3922 MPN 53G970670-15Aircraft Slat
- 1560-00-203-8428 MPN 53-83521-3Air Duct Flanged Adapter
- 1560-00-257-8280 MPN 68A327156-2001Foreign Object Protector Panel
- 4920-00-274-8657 MPN RE268111002-1Aircraft Maintenance Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-629-0872 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M453-5D17 | Boeing Company, The |