NSN 5306-01-629-7300
Close Tolerance Hex Head Bolt
Between 1.765 inches and 1.812 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174CH16A for national stock number 5306016297300.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-629-7300.
-
MPN or Model
AN174CH16A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.765 inches and 1.812 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.2500 inches -
Grip Length
Between 1.296 inches and 1.328 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon flats -
Part Name Assigned By Controlling Agency
Bolt-machine, close tolerance, aircraft -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-001-3599 MPN 1563274-1Fixed Attenuator
- 4920-00-009-5608 MPN 178A213-4Retainer Adapter
- 5935-00-627-2318 MPN 67A30A39Electrical Plug Connector
- 4920-00-922-1417 MPN 259AS100Airborne Torpedo Preset Test Set
- 5950-00-925-6366 MPN 642AS2626-31Radio Frequency Coil
- 5940-01-051-2724 MPN 200AS208Stud Terminal
- 5905-01-071-4398 MPN 642AS2828-3Resistor
- 5930-01-120-1718 MPN 1395AS243Proximity Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-629-7300 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174CH16A | Naval Air Systems Command |