NSN 5306-01-630-2725
Coaxial Connector
Between 2.704 inches and 2.734 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6605D36 for national stock number 5306016302725.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-630-2725.
-
MPN or Model
NAS6605D36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.704 inches and 2.734 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
End Application
7-610000000 -
Thread Diameter
0.312 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-052-5992 MPN NAS333CP17Close Tolerance Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
- 5305-00-079-7960 MPN MS24694S208Machine Screw
- 5305-00-139-7071 MPN MS35307-420Hexagon Head Cap Screw
- 5305-00-150-9211 MPN MILS7839Machine Screw
- 5305-00-163-9847 MPN NAS1189ED6P5LKSocket Head Cap Screw
- 5305-00-208-8218 MPN MILS7839Machine Screw
- 5305-00-269-2803 MPN MS90726-60GHexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-630-2725 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6605D36 | National Aerospace Standards |
NAS6605D36 | National Aerospace Standards |
NAS6605D36 | National Aerospace Standards |
NAS6605D36 | National Aerospace Standards |