NSN 5306-01-641-2837
Coaxial Connector
Hexagon head style, between 0.219 inches and 0.234 inches head height, 0.79 inches head length, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number NAS2817-16 for national stock number 5306016412837.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-641-2837.
-
MPN or Model
NAS2817-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Head Style
Hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Head Length
0.79 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 0.910 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
23200 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-430-4123 MPN NAS1063A10-502ASTerminal Board Marker Strip
- 5940-01-664-5697 MPN NAS1063A2-107DLTerminal Board Marker Strip
- 5305-00-006-2267 MPN NAS1352C02-10Socket Head Cap Screw
- 5305-00-007-2953 MPN NAS1743C02T12USocket Head Cap Screw
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-008-5887 MPN NAS1102C06-10PMachine Screw
- 5305-00-043-0613 MPN NAS1189-3T7Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-641-2837 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2817-16 | National Aerospace Standards |