NSN 5306-01-641-2839
Coaxial Connector
Hexagon head style, between 0.219 inches and 0.234 inches head height, 0.79 inches head length, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number NAS2817-19 for national stock number 5306016412839.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-641-2839.
-
MPN or Model
NAS2817-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Head Length
0.79 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
23200 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-088-2378 MPN NAS715-19BElectrical Receptacle Connector
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5305-00-001-4753 MPN NAS1018-30AHexagon Head Cap Screw
- 5305-00-006-8306 MPN NAS1100C06-4PMachine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-051-4133 MPN MS24694C93Machine Screw
- 5305-00-052-5938 MPN MS35198-80Machine Screw
- 5305-00-057-0534 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-641-2839 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2817-19 | National Aerospace Standards |