NSN 5306-01-643-7829
Coaxial Connector
Between 1.438 inches and 1.468 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6606D14Y for national stock number 5306016437829.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-643-7829.
-
MPN or Model
NAS6606D14Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 1.438 inches and 1.468 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.389 inches and 0.390 inches -
End Application
E-3 aircraft -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-019-4410 MPN 65-2270-2Sidewall Cockpit Trim
- 1680-00-024-3891 MPN 6-52857Hoist Drum Assembly
- 1680-00-053-2576 MPN 114C1226-2Bracket Assembly
- 1560-00-073-1075 MPN 107S8492-1Do Fitting Assembly
- 1680-00-074-2160 MPN 107C2253-1Bell Crank
- 1560-00-237-0866 MPN 9-63039-2Aircraft Structural Component Support
- 5950-00-620-2911 MPN 10-60030-1Power Autotransformer Transformer
- 5930-00-656-3216 MPN 10-20098Rotary Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-643-7829 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6606D14Y | The Boeing Company |