NSN 5306-01-643-9219
Coaxial Connector
1.964 inches fastener length, double hexagon w/hole head style, between 0.575 inches and 0.585 inches head diameter, head height: between 0.302 inches and 0.322 inches .
Manufacturer part number MS14181-05022P for national stock number 5306016439219.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-643-9219.
-
MPN or Model
MS14181-05022P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
1.964 inches -
Head Style
Double hexagon w/hole -
Head Diameter
Between 0.575 inches and 0.585 inches -
Head Height
Between 0.302 inches and 0.322 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thread Diameter
0.3125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
13500 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-6596 MPN MS2485RA2Electrical Receptacle Connector
- 5905-00-116-8568 MPN MS35043-108Composition Fixed Resistor
- 5935-00-122-8554 MPN MS3121E18-32PElectrical Plug Connector
- 5905-00-244-8818 MPN MS35048-40Wire Wound Fixed Resistor
- 5935-00-261-8247 MPN MS3106E28-19PElectrical Plug Connector
- 5935-00-500-8802 MPN MS27467T17B26PElectrical Plug Connector
- 5935-00-506-6632 MPN MS27467T23F35PElectrical Plug Connector
- 5930-00-538-2647 MPN MS35059-1Toggle Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-643-9219 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-05022P | Military Standards |
Stock Check
- NE: 93
- AR: 1