NSN 5306-01-644-1374
Coaxial Connector
Between 0.496 inches and 0.526 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203L3H for national stock number 5306016441374.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-644-1374.
-
MPN or Model
NAS6203L3H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.496 inches and 0.526 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Locking Feature
Patch or strip or pellet threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6203 professional/industrial association standard
More from these suppliers
- 5930-01-400-4025 MPN 2269-006Pressure Switch
- 5940-01-425-7403 MPN NAS1063C8-313Terminal Board Marker Strip
- 5940-01-451-3030 MPN NAS1063A10-105BUTerminal Board Marker Strip
- 5305-00-052-8236 MPN MS51861-52Tapping Screw
- 5305-00-058-3790 MPN NAS514P632-9Machine Screw
- 5305-00-225-9561 MPN NAS1351-8-12PSocket Head Cap Screw
- 5305-00-253-5620 MPN MS21318-29Drive Screw
- 5305-00-257-6124 MPN NAS1189C04P3Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-644-1374 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203L3H | National Aerospace Standards |