NSN 5306-01-645-3114
Coaxial Connector
Dished hexagon head style, 0.190 inches thread diameter, 32 thready qty per inch (tpi), min. tensile strength (psi): 160000 pounds per square inch.
Manufacturer part number BACB30LM3-38 for national stock number 5306016453114.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-645-3114.
-
MPN or Model
BACB30LM3-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Dished hexagon -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-075-6325 MPN 65-33327-4Hinge Pin Assembly
- 5905-00-196-1281 MPN BACRH14U17400FFFilm Fixed Resistor
- 1560-00-304-5574 MPN 9-60309-2Aircraft Structural Component Support
- 1680-00-341-9425 MPN 9-60484-3Seat Pulley And Pin
- 5935-00-539-3920 MPN BACC62AP16E03PElectrical Receptacle Connector
- 1560-00-575-6310 MPN 5-89850-8Aircraft Window Panel
- 1560-00-593-5991 MPN 39-3134-2Vapor Fill Valve Seal Assembly
- 1560-00-593-7319 MPN 6-73136-1Flap Drive Retainer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-645-3114 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3-38 | The Boeing Company |