NSN 5306-01-645-4552
Coaxial Connector
Drilled shank.
Manufacturer part number NAS6604D46 for national stock number 5306016454552.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-645-4552.
-
MPN or Model
NAS6604D46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 3.285 inches and 3.315 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head, close tolerance -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3006 MPN NAS1063B112-128Terminal Board Marker Strip
- 1560-01-623-8875 MPN 520-14948-3Aircraft Stringer
- 5305-00-008-5890 MPN NAS1102C08-14Machine Screw
- 5305-00-020-3812 MPN NAS1190E3P18NSocket Head Cap Screw
- 5305-00-023-2563 MPN NAS603-65Machine Screw
- 5305-00-054-8291 MPN MS21295-65Socket Head Cap Screw
- 5305-00-105-9425 MPN NAS1635-08LE6Socket Head Cap Screw
- 5305-00-163-2685 MPN NAS1133-24Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-645-4552 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6604D46 | National Aerospace Standards |
NAS6604D46 | National Aerospace Standards |