NSN 5306-01-646-2640
Coaxial Connector
Between 5.798 inches and 5.828 inches fastener length, spline extended washer head style, 0.600 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number NASM21297-12074 for national stock number 5306016462640.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-646-2640.
-
MPN or Model
NASM21297-12074
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.173 inches -
Fastener Length
Between 5.798 inches and 5.828 inches -
Head Style
Spline extended washer -
Head Height
0.600 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
End Application
F16 -
Thread Diameter
0.750 inches -
Grip Length
Between 4.615 inches and 4.635 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-2672 MPN NAS1063E3-551UTerminal Board Marker Strip
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5305-00-053-1084 MPN MS35199-51Machine Screw
- 5305-00-066-8190 MPN MS35308-511Hexagon Head Cap Screw
- 5305-00-104-9447 MPN NAS1352C5LN20Socket Head Cap Screw
- 5305-00-115-6127 MPN MS21090-0409Socket Head Cap Screw
- 5305-00-127-0198 MPN NAS1189-3P14Socket Head Cap Screw
- 5305-00-173-8055 MPN NAS1146-4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-646-2640 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21297-12074 | National Aerospace Standards |
MS21297-12074 | Lockheed Martin Corporation |
Stock Check
- NE: 323