NSN 5306-01-650-1061
Close Tolerance Hex Head Bolt
O'level ata-75; fluorescent penetrant inspection per ams 2645.
Manufacturer part number MS9111-22 for national stock number 5306016501061.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-650-1061.
-
MPN or Model
MS9111-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.544 inches -
Fastener Length
2.125 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
0.168 inches -
Grip Diameter
Between 0.2494 inches and 0.2499 inches -
End Application
Kc-46 tanker -
Thread Diameter
0.250 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
125.0 microinches -
Part Name Assigned By Controlling Agency
Bolt, machine-double hexagon extended washer head, close tolerance shank -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf -
Reference Number Differentiating Characteristics
Item is faa certified
More from these suppliers
- 5940-00-950-7781 MPN MS27212-5-8Terminal Board
- 5935-01-062-4870 MPN M81659/29A2-0018Electrical Receptacle Connector
- 5935-01-169-1709 MPN M85049/10-23WElectrical Connector Backshell
- 5935-01-176-6628 MPN AS50151Electrical Plug Connector
- 5935-01-228-8702 MPN AS50151Electrical Plug Connector
- 5935-01-246-3544 MPN AS50151Electrical Plug Connector
- 5935-01-261-8619 MPN MS3450W20-8PElectrical Receptacle Connector
- 5935-01-261-8776 MPN MS3456W20-4PYElectrical Plug Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-650-1061 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9111-22 | Society Of Automotive Engineers Inc |
MS9111-22 | Sae International |
MS9111-22 | Sae International |