NSN 5306-01-650-5032
Coaxial Connector
2.602 inches fastener length, double hexagon w/hole head style, 0.557 inches head height, width between flats: between 0.610 inches and 0.625 inches .
Manufacturer part number NASM21250-0928 for national stock number 5306016505032.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-650-5032.
-
MPN or Model
NASM21250-0928
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.852 inches -
Fastener Length
2.602 inches -
Head Style
Double hexagon w/hole -
Head Height
0.557 inches -
Width Between Flats
Between 0.610 inches and 0.625 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.560 inches and 0.561 inches -
End Application
C130 acft -
Thread Diameter
0.562 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
39200 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension, external wrenching, flanged -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-034-6942 MPN MS18029-6S-14Terminal Board Cover
- 5935-00-060-2285 MPN MS17349C20BElectrical Connector Cover
- 5905-00-067-3249 MPN MS35834-406Film Fixed Resistor
- 5975-00-074-2072 MPN MS1782-1Electrical Components Tiedown Strap
- 5935-00-103-7476 MPN MS27497REB18-32PElectrical Receptacle Connector
- 5905-00-104-5755 MPN MS35043-39Composition Fixed Resistor
- 5940-00-113-3142 MPN MS20659-139Lug Terminal
- 5930-00-152-8756 MPN MS16109-30-8CNRotary Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-650-5032 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21250-0928 | Military Standards |
MS21250-0928 | Military Standards |