NSN 5306-01-651-6553
Close Tolerance Hex Head Bolt
Between 59.2 millimeters and 59.8 millimeters fastener length, undercut hexagon head style, between 4.2 millimeters and 4.5 millimeters head height, width between flats: between 12.73 millimeters and 13.00 millimeters .
Manufacturer part number NA0036-080048 for national stock number 5306016516553.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-651-6553.
-
MPN or Model
NA0036-080048
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 11.0 millimeters and 12.0 millimeters -
Fastener Length
Between 59.2 millimeters and 59.8 millimeters -
Head Style
Undercut hexagon -
Head Height
Between 4.2 millimeters and 4.5 millimeters -
Width Between Flats
Between 12.73 millimeters and 13.00 millimeters -
Grip Diameter
Between 7.962 millimeters and 7.987 millimeters -
Thread Diameter
8.0 millimeters -
Grip Length
Between 47.8 millimeters and 48.2 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
0.8 -
Surface Finish
0.8 micrometers grip -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 1st material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5940-01-451-2672 MPN NAS1063E3-551UTerminal Board Marker Strip
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-057-0533 MPN MS51958-49Machine Screw
- 5305-00-058-9380 MPN MS51977-52Setscrew
- 5305-00-097-4563 MPN NAS1100-04-8BMachine Screw
- 5305-00-126-6154 MPN NAS1623E29Machine Screw
- 5305-00-150-0847 MPN NAS1189C06T24LSocket Head Cap Screw
- 5305-00-159-5560 MPN NAS1189-08P8Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-651-6553 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-080048 | National Aerospace Standards |