NSN 5306-01-652-0946
Close Tolerance Hex Head Bolt
Alloy steel per procurement specification.
Manufacturer part number NA0036-080116 for national stock number 5306016520946.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-652-0946.
-
MPN or Model
NA0036-080116
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
11.5 millimeters -
Fastener Length
Between 127.2 millimeters and 127.8 millimeters -
Head Style
Hexagon -
Head Height
Between 4.2 millimeters and 4.5 millimeters -
Width Between Flats
Between 12.73 millimeters and 13.00 millimeters -
Grip Diameter
Between 7.962 millimeters and 7.987 millimeters -
Point Diameter
Between 6.2 millimeters and 6.7 millimeters -
Point Style
Flat -
End Application
1055-01-536-7106 -
Thread Diameter
8.0 millimeters -
Grip Length
Between 115.8 millimeters and 116.2 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
1.0 -
External Thread Tolerance Class
4h6h -
Surface Finish
0.8 micrometers fastener -
Part Name Assigned By Controlling Agency
Bolt, close tolerance, hexagon head, alloy steel, 1100 mpa, metric -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 national std/spec single treatment response -
Thread Series Designator
Mj -
Specification Data
80205-na0036 national std/spec
More from these suppliers
- 5940-01-413-3014 MPN NAS1063B227-230Terminal Board Marker Strip
- 5940-01-425-7390 MPN NAS1063C8-338Terminal Board Marker Strip
- 5940-01-451-2671 MPN NAS1063E3-551RTerminal Board Marker Strip
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-058-2067 MPN NAS1352-06H6PSocket Head Cap Screw
- 5305-00-059-4573 MPN MS35190-258Machine Screw
- 5305-00-082-6735 MPN MS51959-119Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-652-0946 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-080116 | National Aerospace Standards |