NSN 5306-01-652-1169
Close Tolerance Hex Head Bolt
Between 44.2 millimeters and 44.8 millimeters fastener length, hexagon head style, between 4.70 millimeters and 5.00 millimeters head height, width between flats: between 16.73 millimeters and 17.00 millimeters .
Manufacturer part number NA0045-100030 for national stock number 5306016521169.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-652-1169.
-
MPN or Model
NA0045-100030
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
14.50 millimeters -
Fastener Length
Between 44.2 millimeters and 44.8 millimeters -
Head Style
Hexagon -
Head Height
Between 4.70 millimeters and 5.00 millimeters -
Width Between Flats
Between 16.73 millimeters and 17.00 millimeters -
Grip Diameter
Between 9.962 millimeters and 9.987 millimeters -
End Application
1055-01-536-7106 -
Thread Diameter
10.0 millimeters -
Grip Length
Between 29.80 millimeters and 30.20 millimeters -
Thread Pitch In Millimeters
1.25 -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, class 4 assn standard single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5935-00-435-3839 MPN NAS1693G10T5S7Electrical Receptacle Connector
- 5940-00-990-1658 MPN NAS705C2Stud Terminal
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 5940-01-425-7558 MPN NAS1063A3-TB504AHTerminal Board Marker Strip
- 5305-00-001-9750 MPN NAS1351-4-14PSocket Head Cap Screw
- 5305-00-007-6253 MPN NAS1189-02P4Socket Head Cap Screw
- 5305-00-008-9117 MPN NAS1190C04T4LSocket Head Cap Screw
- 5305-00-054-4997 MPN MS24693-CB70Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-652-1169 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0045-100030 | Lockheed Martin Corporation |
NA0045-100030 | National Aerospace Standards |