NSN 5306-01-652-5602
Coaxial Connector
Between 0.375 inches and 0.390 inches head height, between 1.052 inches and 1.065 inches width between flats, between 0.748 inches and 0.749 inches grip diameter, thread diameter: 0.750 inches.
Manufacturer part number NAS6712DU29 for national stock number 5306016525602.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-652-5602.
-
MPN or Model
NAS6712DU29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
End Application
Aircraft (cargo) ground support -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
16 -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700 method 1, type 2 or 8, class 4 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-454-6899 MPN NAS1650R22B55SNElectrical Receptacle Connector
- 5305-00-008-9055 MPN NAS1298-5-18Shoulder Screw
- 5305-00-052-8900 MPN MS24630-51Tapping Screw
- 5305-00-054-9237 MPN MS24694C125Machine Screw
- 5305-00-071-2230 MPN MS90725-21Hexagon Head Cap Screw
- 5305-00-071-2502 MPN MS24694A116Machine Screw
- 5305-00-104-5076 MPN NAS1352-5LE56PSocket Head Cap Screw
- 5305-00-127-3553 MPN MS27039DD4-23Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-652-5602 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712DU29 | National Aerospace Standards |
Stock Check
- NE: 169
- NS: 7