NSN 5306-01-653-2110
Coaxial Connector
Between 0.417 inches and 0.447 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6204-1D for national stock number 5306016532110.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-653-2110.
-
MPN or Model
NAS6204-1D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 0.417 inches and 0.447 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Bolt, tension, hex head -
Material
Steel comp e4340 or steel comp 8740
More from these suppliers
- 5940-00-892-2911 MPN NAS1388-3Conductor Splice
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-008-5885 MPN NAS1102E06-7PMachine Screw
- 5305-00-032-3931 MPN NAS1352-03-3Socket Head Cap Screw
- 5305-00-068-0543 MPN MS24678-11CSocket Head Cap Screw
- 5305-00-071-2094 MPN MS51958-84Machine Screw
- 5305-00-113-3753 MPN NAS1219-5-8PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-653-2110 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-1D | National Aerospace Standards |