NSN 5306-01-653-2126
Coaxial Connector
Between 0.688 inches and 0.718 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6706-2 for national stock number 5306016532126.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-653-2126.
-
MPN or Model
NAS6706-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 0.688 inches and 0.718 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-860-0633 MPN NAS1211G10Tie Down St Fitting
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-057-0530 MPN MS51958-48Machine Screw
- 5305-00-167-3894 MPN MILS7839Machine Screw
- 5305-00-191-3641 MPN NASM51851Tapping Screw
- 5305-00-207-7140 MPN MS24677-86Socket Head Cap Screw
- 5305-00-286-0269 MPN NAS335-6Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-653-2126 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706-2 | National Aerospace Standards |
NAS6706-2 | C & L Aerospace Pty Ltd |