NSN 5306-01-653-5635
Coaxial Connector
Drilled head.
Manufacturer part number NAS6607H19 for national stock number 5306016535635.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-653-5635.
-
MPN or Model
NAS6607H19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 1.867 inches and 1.897 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
End Application
B-52 aircraft -
Thread Diameter
0.437 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension hex head -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3014 MPN NAS1063B227-230Terminal Board Marker Strip
- 5940-01-455-2468 MPN NAS1063A10-105BCTerminal Board Marker Strip
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5305-00-007-1588 MPN NAS1102C02-6PMachine Screw
- 5305-00-009-9207 MPN NAS1096-3-23Hexagon Head Cap Screw
- 5305-00-052-7477 MPN MS24627-69Tapping Screw
- 5305-00-054-5651 MPN MS51957-17Machine Screw
- 5305-00-057-0522 MPN NASM51958Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-653-5635 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6607H19 | National Aerospace Standards |