NSN 5306-01-653-8507
Coaxial Connector
Lubricant: solid film lubricant per as5272, type i.
Manufacturer part number MS14181-16062L for national stock number 5306016538507.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-653-8507.
-
MPN or Model
MS14181-16062L
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.546 inches -
Fastener Length
5.446 inches -
Head Style
Spline extended washer -
Head Height
0.800 inches -
Extended Washer Diameter
Between 1.846 inches and 1.856 inches -
Extended Washer Thickness
Between 0.134 inches and 0.154 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Head Minor Diameter
Between 1.047 inches and 1.062 inches -
Thread Diameter
1.0 inches -
Grip Length
3.875 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, tension -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-218-3818 MPN NAS1692G10T5P6Electrical Receptacle Connector
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-01-425-6528 MPN NAS1063A20-457Terminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-058-0807 MPN NAS1101-04H5Machine Screw
- 5305-00-058-4099 MPN NAS1190-06T8LSocket Head Cap Screw
- 5305-00-058-9358 MPN MS51977-3Setscrew
- 5305-00-058-9361 MPN MS51977-18Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-653-8507 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14181-16062L | National Aerospace Standards |