NSN 5306-01-656-1706
Coaxial Connector
4.646 inches fastener length, hexagon head style, 0.625 inches head height, width between flats: between 1.801 inches and 1.815 inches .
Manufacturer part number NAS1970C48 for national stock number 5306016561706.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-656-1706.
-
MPN or Model
NAS1970C48
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.646 inches -
Fastener Length
4.646 inches -
Head Style
Hexagon -
Head Height
0.625 inches -
Width Between Flats
Between 1.801 inches and 1.815 inches -
Grip Diameter
Between 1.2475 inches and 1.2490 inches -
Thread Diameter
1.250 inches -
Grip Length
3.00 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, shear, hexagon head -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6520 MPN NAS1063A15-327Terminal Board Marker Strip
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 1560-01-623-8875 MPN 520-14948-3Aircraft Stringer
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-008-7864 MPN NAS1631E2Machine Screw
- 5305-00-020-2826 MPN NAS1221-08-10PMachine Screw
- 5305-00-046-8273 MPN NAS1352-04-12Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-656-1706 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1970C48 | National Aerospace Standards |
Stock Check
- NS: 9
- NE: 8