NSN 5306-01-656-3767
Coaxial Connector
Between 4.193 inches and 4.223 inches fastener length, hexagon head style, between 0.625 inches and 0.640 inches head height, width between flats: between 1.801 inches and 1.815 inches .
Manufacturer part number NAS1970-41 for national stock number 5306016563767.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-656-3767.
-
MPN or Model
NAS1970-41
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.646 inches -
Fastener Length
Between 4.193 inches and 4.223 inches -
Head Style
Hexagon -
Head Height
Between 0.625 inches and 0.640 inches -
Width Between Flats
Between 1.801 inches and 1.815 inches -
Grip Diameter
Between 1.2475 inches and 1.2490 inches -
End Application
1055-01-536-7106 -
Thread Diameter
1.250 inches -
Grip Length
Between 2.552 inches and 2.572 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
202000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches threads -
Chamfer Angle
15.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6509 MPN NAS1063A5-442Terminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-021-3969 MPN MS35308-109Hexagon Head Cap Screw
- 5305-00-034-1388 MPN NAS1624C6Machine Screw
- 5305-00-045-3181 MPN MS24694S100Machine Screw
- 5305-00-051-2333 MPN MS51958-107Machine Screw
- 5305-00-052-4261 MPN NAS1207-38Close Tolerance Screw
- 5305-00-058-9371 MPN MS51977-33Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-656-3767 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1970-41 | National Aerospace Standards |