NSN 5306-01-656-8377
Close Tolerance Hex Head Bolt
Undrilled shank.
Manufacturer part number STSBG001A10U022 for national stock number 5306016568377.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-656-8377.
-
MPN or Model
STSBG001A10U022
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.717 inches -
Fastener Length
2.092 inches -
Head Style
Double hexagon -
Head Height
0.350 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
End Application
Various c-5 -
Thread Diameter
0.625 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt-shear, 156 ksi fsu external wrenching 12-point -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-541-5150 MPN 3M39C05P59Headed Straight Pin
- 5305-00-505-3048 MPN LS15234C06-13Close Tolerance Screw
- 5305-00-541-9194 MPN 106706T7-13Close Tolerance Screw
- 5305-00-837-4189 MPN NAS1143C1Close Tolerance Screw
- 5305-00-915-2125 MPN NAS1101-08H6Machine Screw
- 5305-00-969-4753 MPN 112-0716-009Socket Head Cap Screw
- 5305-00-991-5894 MPN 540215Machine Screw
- 5305-01-013-9599 MPN 73991H-7D25Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-656-8377 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
STSBG001A10U022 | Sps Technologies, Llc |
STSBG001 | Lockheed Martin Corporation |