NSN 5306-01-657-7008
Coaxial Connector
Between 2.888 inches and 2.918 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6307-38 for national stock number 5306016577008.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-657-7008.
-
MPN or Model
NAS6307-38
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.888 inches and 2.918 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
End Application
1520-01-599-2203 -
Thread Diameter
0.438 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt tension hex head -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-810-7063 MPN NAS715-23CElectrical Receptacle Connector
- 1680-01-532-3063 MPN NAS77A6-023NAirc Sleeve Bushing
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-052-7450 MPN MS35198-98Machine Screw
- 5305-00-068-9167 MPN MS35202-73Machine Screw
- 5305-00-152-5653 MPN MS24693C104Machine Screw
- 5305-00-253-5603 MPN MS21318-1Drive Screw
- 5305-00-269-2796 MPN MS90726-53Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-657-7008 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6307-38 | National Aerospace Standards |