NSN 5925-00-103-7918
Overload Switch
Single pole type body style, metal case material, single pole, single throw, normally closed switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number MS26574-4A for national stock number 5925001037918.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-103-7918.
-
MPN or Model
MS26574-4A
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.1 lb -
Body Style
Single pole type -
Bushing Length
0.359 inches -
Body Length
0.780 inches -
Body Width
0.580 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
0.593 inches -
Switch Contact Arrangement
Single pole, single throw, normally closed -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.420 inches -
Pole Quantity
1 -
Mounting Facility Type And Quantity
1 threaded bushing -
Storage Type
General purpose warehouse -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
4.0 amperes ac and 4.0 amperes dc single location -
Operating Voltage Type And Rating Per Pole In Volts
115.0 ac and 28.0 dc single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
100.0 ac single location and 100.0 dc single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Thermal single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
145.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 push-pull -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Auxiliary Switch Function And Quantity
1 control -
Internal Trip Release Configuration
Series trip single location -
Thread Size
0.438 inches -
Switch Location And Position Designation
External at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
2.000 at 200 pct single location and 20.000 at 200 pct single location -
Inclosure Protection Type For Which Designed
Moisture resistant and explosion resistant -
Trip Release Ambient Tempurature Rating
25.0 degrees celsius single location -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
4.0 ac and 4.0 dc -
Switch Voltage Rating And Type In Volts
115.0 ac and 28.0 dc -
Frequency In Hertz
400.0 single location -
Test Data Document
81349-mil-c-5809 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Un -
Terminal Type And Quantity
2 screw -
Specification Data
96906-ms26574 government standard
More from these suppliers
- 5305-00-984-4988 MPN 5901813Machine Screw
- 5905-00-004-6064 MPN RNC50H3090FMFilm Fixed Resistor
- 5905-00-004-6087 MPN RNR60H3401FSFilm Fixed Resistor
- 5905-00-005-2671 MPN RBR71L63400BMNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2695 MPN RNC55J2491FFilm Fixed Resistor
- 5930-00-005-6968 MPN MIL-S-3786/4Rotary Switch
- 5905-00-007-0734 MPN RE70N1211Noninductive Wire Wound Fixed Resistor
- 5905-00-008-8518 MPN RE65G1200Inductive Wire Wound Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-00-103-7918 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS26574-4A | Military Standards |
MIL-C-5809 | Military Specifications |
7274-4-4 | Sensata Technologies, Inc |
6415829 | Embraer S.a. |
6415829 | Embraer Empresa Brasileira De |
Stock Check
![](/public/images/partscage_shelf3.png)