NSN 5925-00-620-5844
Overload Switch
Multipole-single actuator type body style, plastic case material, single pole, single throw, normally closed switch contact arrangement, pole quantity: 3.
Manufacturer part number ALB-10/150 for national stock number 5925006205844.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-620-5844.
-
MPN or Model
ALB-10/150
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
5.2 lb -
Body Style
Multipole-single actuator type -
Body Length
5.000 inches -
Body Width
4.750 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
3.625 inches -
Center To Center Distance Between Terminals Parallel To Width
1.688 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
4.250 inches -
Switch Contact Arrangement
Single pole, single throw, normally closed -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.750 inches -
Boss Height
0.312 inches -
Mounting Surface To Terminal End Distance
4.625 inches -
Pole Quantity
3 -
Mounting Facility Type And Quantity
2 threaded hole -
Storage Type
General purpose warehouse -
Thready Qty Per Inch (tpi)
20 -
Maximum Continuous Load Current Rating Per Pole
150.0 amperes ac all locations and 150.0 amperes dc all locations -
Operating Voltage Type And Rating Per Pole In Volts
125.0 ac all locations and 125.0 dc all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
10000.0 ac all locations and 5000.0 dc all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Thermal-magnetic all locations -
Trip Release Characteristic
Instantaneous all locations and time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
138.0 all locations -
Ultimate Trip Time Per Pole In Seconds
3600.000 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole two -
External Actuator Linkage Arrangement
One, two, and three linked -
Auxiliary Switch Function And Quantity
1 alarm -
Thread Size
0.250 inches -
Switch Location And Position Designation
External at pole two -
Trip Delay Time In Seconds Per Rated Continuous Current
10.000 at 200 pct all locations and 210.000 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Fungus resistant -
Trip Release Ambient Tempurature Rating
50.0 degrees celsius all locations -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
10.0 ac and 10.0 dc -
Switch Voltage Rating And Type In Volts
125.0 ac and 125.0 dc -
Frequency In Hertz
60.0 all locations -
Test Data Document
81349-mil-c-17588 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Terminal Type And Quantity
6 threaded stud -
Specification Data
81349-mil-c-17588 government specification
More from these suppliers
- 5930-00-259-8893 MPN 9738735G5Rotary Switch
- 5905-00-368-0982 MPN 3887778G11Resistor Assembly
- 5930-00-624-4869 MPN 458A621NP6Electr Contact Assy
- 5930-00-997-8178 MPN 6960053G9Interlock Switch
- 5950-01-113-1773 MPN 22D11G86AElectrical Coil
- 5950-00-932-2997 MPN F1D179G1Electrical Coil
- 5905-00-617-2305 MPN DMS83079BFilm Fixed Resistor
- 5935-00-823-0105 MPN L00663Electrical Receptacle Connector
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-00-620-5844 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ALB-10/150 | Military Specifications |
MIL-C-17588 | Military Specifications |
6319452G2L | General Electric Co |
6319482G2L | General Electric Co |
TN231150 | General Electric Co |
DMS 79009B | Dla Land And Maritime |