NSN 5925-00-766-8538
Overload Switch
Metal case material, moderately rugged fragility factor, 1 poles, storage type: general purpose warehouse.
Manufacturer part number MS24571-2 for national stock number 5925007668538.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-766-8538.
-
MPN or Model
MS24571-2
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.3 lb -
Bushing Length
Between 0.187 inches and 0.249 inches -
Body Length
2.189 inches -
Body Width
0.760 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
1.190 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 1.800 inches and 1.820 inches -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
2.370 inches -
Pole Quantity
1 -
Mounting Facility Type And Quantity
2 threaded hole -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
2.5 amperes ac single location and 2.5 amperes dc single location -
Operating Voltage Type And Rating Per Pole In Volts
200.0 ac single location and 28.0 dc single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
5000.0 ac single location and 5000.0 dc single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Magnetic single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
138.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 push-pull -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Internal Trip Release Configuration
Relay trip single location -
Thread Size
0.138 inches -
Trip Delay Time In Seconds Per Rated Continuous Current
12.000 at 200 pct single location and 32.000 at 200 pct single location -
Inclosure Protection Type For Which Designed
Corrosion resistant and hermetically sealed and explosion proof and humidity resistant and salt spray proof and sand resistant and dustproof and vibrationproof and shock resistant and fungus resistant -
Frequency In Hertz
400.0 single location -
Unpackaged Unit Weight
0.200 pounds -
Test Data Document
81349-mil-c-27715 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Terminal Type And Quantity
2 tab w/screw -
Specification Data
96906-ms24571 government standard
More from these suppliers
- 5905-00-001-2812 MPN MILR39005-4Noninductive Wire Wound Fixed Resistor
- 5905-00-001-7186 MPN RP112FD501KKNonprecision Wire Wound Variable Resistor
- 5905-00-004-6081 MPN RNC60H1300FMFilm Fixed Resistor
- 5905-00-005-2667 MPN MILR39005-6Noninductive Wire Wound Fixed Resistor
- 5905-00-005-3370 MPN RCR20G152JRComposition Fixed Resistor
- 5905-00-006-5583 MPN RNR55J1001FSFilm Fixed Resistor
- 5905-00-008-8255 MPN RER70F19R6MInductive Wire Wound Fixed Resistor
- 5905-00-009-1161 MPN RN65C1401CFilm Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-00-766-8538 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24571-2 | Military Standards |
MIL-DTL-27715 | Military Specifications |
6752-12-2 | Sensata Technologies, Inc |
10-30108-2 | The Boeing Company |
6752-11-2 | Raytheon Company |
6752-12-2-1/2 | Raytheon Systems Ltd Weapons |
MIL-C-27715 | Military Specifications |