NSN 5925-00-824-7618
Overload Switch
Single pole type body style, metal case material, single pole, double throw switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number AP1R66-5 for national stock number 5925008247618.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-824-7618.
-
MPN or Model
AP1R66-5
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
Thread Pitch Diameters
+0.3503/+0.3537 inches -
Body Style
Single pole type -
Bushing Length
Between 0.332 inches and 0.380 inches -
Body Length
1.562 inches -
Body Width
0.625 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
0.906 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.700 inches -
Pole Quantity
1 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
3.0 amperes ac single location and 3.0 amperes dc single location -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac single location and 50.0 dc single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
600.0 ac single location and 600.0 dc single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Magnetic single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
115.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip single location -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.055 at 200 pct single location and 0.240 at 200 pct single location -
Inclosure Protection Type For Which Designed
Vibration resistant and moisture resistant and fungus resistant and shock resistant and salt spray proof -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
60.0 single location -
Test Data Document
81349-mil-c-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
2 wire hook -
Specification Data
81349-mil-c-39019/2 government specification
More from these suppliers
- 5950-00-078-1774 MPN 77C707806P1Power Transformer
- 5950-00-080-1208 MPN 7417001P1Reactor
- 5935-00-087-0207 MPN 7226698P001Electrical Plug Connector
- 5935-00-262-3223 MPN 77C712747P001Electrical Receptacle Connector
- 5950-00-497-4386 MPN 7747952P032Radio Frequency Coil
- 5945-00-510-0548 MPN 7703839P2Electromagnetic Relay
- 5935-00-717-6924 MPN 7711489P002Electrical Receptacle Connector
- 5930-00-824-1170 MPN 77C707974P002Rotary Switch
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-00-824-7618 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AP1R66-5 | Sensata Technologies Maryland, Inc |
SM3HK3-50DC2 | Eaton Corp |
M39019/02-31 | Military Specifications |
MIL-C-39019/2 | Military Specifications |
7644929P5 | Lockheed Martin Corporation |
352250009109 | Thales Nederland |
Stock Check
![](/public/images/partscage_shelf3.png)