NSN 5925-00-882-1597
Overload Switch
Single pole type body style, plastic case material, single pole, double throw switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number 711570-015 for national stock number 5925008821597.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-882-1597.
-
MPN or Model
711570-015
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Thread Pitch Diameters
+0.1177/+0.1214 inches -
Body Style
Single pole type -
Body Length
Between 2.485 inches and 2.515 inches -
Body Width
Between 0.735 inches and 0.765 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
Between 1.925 inches and 1.955 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 2.047 inches and 2.077 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Boss Height
Between 0.125 inches and 0.155 inches -
Mounting Surface To Terminal End Distance
Between 2.775 inches and 2.995 inches -
Pole Quantity
1 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
2 threaded hole -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
500.0 milliamperes ac single location -
Operating Voltage Type And Rating Per Pole In Volts
250.0 ac single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Magnetic single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip single location -
Thread Size
0.138 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
3.000 at 200 pct single location and 10.000 at 200 pct single location -
Inclosure Protection Type For Which Designed
Salt spray proof and shock resistant and vibration resistant and moisture resistant -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
5.0 ac and 1.0 dc -
Switch Voltage Rating And Type In Volts
115.0 ac and 50.0 dc -
Frequency In Hertz
60.0 single location -
Unpackaged Unit Weight
4.250 ounces -
Test Data Document
05869-711570 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Thread Series Designator
Unc -
Terminal Type And Quantity
2 threaded stud
More from these suppliers
- 5935-00-045-3378 MPN 4118832-224Electrical Receptacle Connector
- 5905-00-060-4553 MPN 4171407-77Film Fixed Resistor
- 5940-00-082-4922 MPN 722248-66Stud Terminal
- 5950-00-106-7246 MPN 5351-018Power Transformer
- 5935-00-110-9208 MPN 0712228-075Electrical Receptacle Connector Body
- 5905-00-174-2738 MPN 4171588-542Inductive Wire Wound Fixed Resistor
- 5905-00-251-7699 MPN 10188678Nonprecision Nonwire Wound Variable Resistor
- 5905-00-279-2668 MPN 4171300-200Composition Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-00-882-1597 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
711570-015 | Raytheon Company |
315C861G07 | Westinghouse Electric Corp |
711570-015 | Raytheon Company |
315C861G07 | Eaton Corporation |
APL1-19-15-R | Sensata Technologies Maryland, Inc |
70-132-6MG6 | Eaton Corp |
Stock Check
![](/public/images/partscage_shelf3.png)