NSN 5925-00-926-8425
Overload Switch
Multipole-multiple actuator type body style, plastic case material, moderately rugged fragility factor, pole quantity: 3.
Manufacturer part number 260-4012-740 for national stock number 5925009268425.
Datasheet
-
Product description
Circuit Breaker NSN 5925-00-926-8425.
-
MPN or Model
260-4012-740
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Thread Pitch Diameters
+0.1177/+0.1214 inches -
Body Style
Multipole-multiple actuator type -
Body Length
2.530 inches -
Body Width
2.250 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
Between 1.930 inches and 1.950 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.740 inches and 0.760 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 2.050 inches and 2.070 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
Between 0.740 inches and 0.760 inches -
Fragility Factor
Moderately rugged -
Boss Height
Between 0.092 inches and 0.155 inches -
Mounting Surface To Terminal End Distance
2.535 inches -
Pole Quantity
3 -
Mounting Facility Type And Quantity
6 threaded hole -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
50.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
250.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
115.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
3 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At each pole -
External Actuator Linkage Arrangement
One, two, and three linked -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.138 inches -
Trip Delay Time In Seconds Per Rated Continuous Current
20.000 at 200 pct all locations and 80.000 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Vibration resistant and shock resistant and humidity resistant and sand resistant and dustproof and explosion proof -
Frequency In Hertz
400.0 all locations -
Unpackaged Unit Weight
14.000 ounces -
Test Data Document
13499-260-4012 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Thread Series Designator
Unc -
Terminal Type And Quantity
6 threaded stud
More from these suppliers
- 5975-00-007-1053 MPN 761-4884-001Special Plate
- 5950-00-041-2143 MPN 240-0047-00Radio Frequency Coil
- 5985-00-086-8708 MPN 410-0230-000Radio Frequency Transmission Line Switch
- 5905-00-104-8336 MPN 745-1346-000Composition Fixed Resistor
- 5905-00-111-4736 MPN 745-1319-000Composition Fixed Resistor
- 5930-00-116-6573 MPN 269-2613-140Rotary Switch Section
- 5935-00-132-2667 MPN 371-8614-030Electrical Receptacle Connector
- 5950-00-281-2389 MPN 240-0769-0004
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-00-926-8425 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
260-4012-740 | Rockwell Collins, Inc. |
APL111-516-740 | Sensata Technologies Maryland, Inc |
AM333MG6-50-250VAC400C14 | Eaton Corp |
AM333MG6-50-250-14-400 | Eaton Corp |
Stock Check
![](/public/images/partscage_shelf3.png)