NSN 5925-01-027-8132
Overload Switch
Multipole-single actuator type body style, metal case material, single pole, double throw switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number 338362-4 for national stock number 5925010278132.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-027-8132.
-
MPN or Model
338362-4
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.7 lb -
Thread Pitch Diameters
+0.3503/+0.3537 inches -
Body Style
Multipole-single actuator type -
Bushing Length
Between 0.360 inches and 0.380 inches -
Body Length
Between 1.464 inches and 1.526 inches -
Body Width
Between 1.841 inches and 1.903 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
Between 0.870 inches and 0.906 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.620 inches and 0.630 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
Between 1.647 inches and 1.709 inches -
Pole Quantity
3 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
5.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
300.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
115.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole two -
Auxiliary Switch Function And Quantity
3 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at each pole -
Trip Delay Time In Seconds Per Rated Continuous Current
0.055 at 200 pct all locations and 0.950 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Explosion resistant and fungus resistant and hermetically sealed -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
1.0 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
125.0 ac and 50.0 dc -
Frequency In Hertz
400.0 all locations -
Unpackaged Unit Weight
4.500 ounces -
Test Data Document
56232-338362 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Thread Series Designator
Unef -
Terminal Type And Quantity
6 wire hook
More from these suppliers
- 5985-00-014-2665 MPN 2379768Waveguide Assembly
- 5985-00-023-6717 MPN 2377407-001Antenna Reflector Section
- 5950-00-074-4635 MPN 2578717Power Transformer
- 5905-00-192-0450 MPN 0526-91Composition Fixed Resistor
- 5940-00-199-1020 MPN 6008Terminal Board
- 5905-00-243-2368 MPN 337618-420Film Fixed Resistor
- 5930-00-552-9587 MPN 738388-02Toggle Switch
- 5930-00-606-4766 MPN 1653415-14Push Button
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-027-8132 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
338362-4 | Lockheed Martin Corporation |
AP112-R-252-4 | Sensata Technologies Maryland, Inc |
SM-333-HHHK-5-240-400-2 | Eaton Corp |