NSN 5925-01-036-7398
Overload Switch
Single pole type body style, metal case material, single pole, double throw switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number AP1-1R-71-501 for national stock number 5925010367398.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-036-7398.
-
MPN or Model
AP1-1R-71-501
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.2 lb -
Thread Pitch Diameters
+0.3503/+0.3537 inches -
Body Style
Single pole type -
Bushing Length
Between 0.332 inches and 0.380 inches -
Body Length
1.562 inches -
Body Width
0.625 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
0.906 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.700 inches -
Pole Quantity
1 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
Thd bushing w/panel seal -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
500.0 milliamperes ac single location and 500.0 milliamperes dc single location -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac single location and 50.0 dc single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
300.0 ac single location and 500.0 dc single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Magnetic single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
115.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip single location -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.550 at 200 pct single location and 1.000 at 200 pct single location -
Inclosure Protection Type For Which Designed
Fungus resistant and hermetically sealed -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
400.0 single location -
Test Data Document
81349-mil-prf-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
2 wire hook -
Specification Data
81349-mil-prf-39019/2 government specification
More from these suppliers
- 5945-00-027-8517 MPN F288RElectromagnetic Relay
- 5925-00-081-7593 MPN 3XAM17-44-208-400-55Circuit Breaker
- 5925-00-409-3622 MPN AM333-10-250-60-4Circuit Breaker
- 5925-00-487-1496 MPN AM12MG6-1-74Circuit Breaker
- 5925-00-505-7579 MPN AM1510MG3-10-32VDC2Circuit Breaker
- 5925-00-552-3433 MPN AM13MG3-50-115-60-5Circuit Breaker
- 5925-00-772-3498 MPN PAM33MG3-1-250-400Circuit Breaker
- 5925-00-815-7791 MPN 2263SMG4HK5-240VAC3Circuit Breaker
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-036-7398 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AP1-1R-71-501 | Sensata Technologies Maryland, Inc |
HB1Z2-19 | Eaton Corp |
HE1Z7-19 | Eaton Corp |
HE1C2-0-5-2 | Eaton Corp |
SM3HK0-5-250VAC400C2 | Eaton Corp |
M39019/02-209 | Military Specifications |
MIL-PRF-39019/2 | Military Specifications |
352250009106 | Thales Nederland |
M39019/2-11 | Military Specifications |
MIL-C-39019/2 | Military Specifications |
M39019-2-19 | Military Specifications |