NSN 5925-01-041-2586
Overload Switch
Single pole type body style, metal case material, at 6 oclock nonturn device location, switch contact arrangement: single pole, double throw.
Manufacturer part number AP1R020-214-0216 for national stock number 5925010412586.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-041-2586.
-
MPN or Model
AP1R020-214-0216
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.1 lb -
Thread Pitch Diameters
+0.3503/+0.3537 inches -
Body Style
Single pole type -
Bushing Length
Between 0.300 inches and 0.320 inches -
Body Length
1.760 inches -
Body Width
0.640 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
Between 0.844 inches and 0.906 inches -
Nonturn Device Location
At 6 oclock -
Nonturn Device Radius
0.690 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.700 inches -
Pole Quantity
1 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
1.0 amperes ac single location and 1.0 amperes dc single location -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac single location and 50.0 dc single location -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac single location and 1000.0 dc single location -
Circuit Protection Type
Overcurrent single location -
Trip Release Method
Magnetic single location -
Trip Release Characteristic
Time delay single location -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
150.0 single location -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole one -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip single location -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.055 at 200 pct single location and 0.950 at 200 pct single location -
Inclosure Protection Type For Which Designed
Fungus resistant and moisture resistant and hermetically sealed and salt spray proof -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
400.0 single location -
Unpackaged Unit Weight
50.0 grams -
Test Data Document
81349-mil-c-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
2 wire hook -
Specification Data
81349-mil-c-39019/2 government specification
More from these suppliers
- 5905-00-136-8405 MPN 4171306-428Composition Fixed Resistor
- 5905-00-264-3832 MPN 7901894-222Film Fixed Resistor
- 5905-00-279-2542 MPN 4171302-135Composition Fixed Resistor
- 5905-00-279-3502 MPN 4171300-3Composition Fixed Resistor
- 5905-00-409-7251 MPN 4171594-56Film Fixed Resistor
- 5935-00-436-0940 MPN 712207-30Electrical Plug Connector
- 5935-00-465-0593 MPN 5351-78Electrical Receptacle Connector
- 5905-00-705-1768 MPN 719150-1Precision Wire Wound Variable Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-041-2586 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AP1R020-214-0216 | Sensata Technologies Maryland, Inc |
AP1-1R4-2-102 | Sensata Technologies Maryland, Inc |
HB1Z2-30 | Eaton Corp |
SM3HK1-240VAC400C1 | Eaton Corp |
M39019-2-28 | Military Specifications |
M39019/2-22 | Military Specifications |
M39019/02-216 | Military Specifications |
MIL-PRF-39019/2 | Military Specifications |
3522 500 26377 | Thales Nederland |
352250008465 | Thales Nederland |
711520-158 | Raytheon Company |
4116000-095 | Raytheon Company |
MIL-C-39019/2 | Military Specifications |
M39019/2-30 | Military Specifications |