NSN 5925-01-044-3993
Overload Switch
Metal case material, single pole, double throw switch contact arrangement, 2 poles, storage type: general purpose warehouse.
Manufacturer part number M39019/04-250 for national stock number 5925010443993.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-044-3993.
-
MPN or Model
M39019/04-250
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.4 lb -
Bushing Length
Between 0.332 inches and 0.380 inches -
Body Length
Between 1.531 inches and 1.562 inches -
Body Width
Between 1.250 inches and 1.281 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
Between 0.875 inches and 0.906 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.594 inches and 0.653 inches -
Switch Contact Arrangement
Single pole, double throw -
Mounting Surface To Terminal End Distance
Between 1.797 inches and 1.828 inches -
Pole Quantity
2 -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
10.0 amperes ac all locations and 10.0 amperes dc all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations and 50.0 dc all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
300.0 ac all locations and 500.0 dc all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Instantaneous all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
Between pole one and two -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole two -
Inclosure Protection Type For Which Designed
Dustproof and hermetically sealed -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
400.0 all locations -
Unpackaged Unit Weight
100.0 grams -
Test Data Document
81349-mil-r-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
4 wire hook -
Specification Data
81349-mil-c-39019/4 government specification
More from these suppliers
- 5930-01-160-2877 MPN 33-808884-5Push Switch
- 5935-00-170-1847 MPN 89-683240-1Electrical Receptacle Connector
- 5950-01-023-8313 MPN 55-817004-1Power Transformer
- 5905-00-005-2685 MPN RNC65H2743FMFilm Fixed Resistor
- 5905-00-008-4268 MPN MILR55182-1Film Fixed Resistor
- 5935-00-009-6393 MPN M83723/76R14046Electrical Plug Connector
- 5905-00-012-2859 MPN RLR05C3901GRFilm Fixed Resistor
- 5905-00-024-0543 MPN MIL-R-39009/1Inductive Wire Wound Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-044-3993 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M39019/04-250 | Military Specifications |
MIL-C-39019/4 | Military Specifications |
29-812571-2 | General Dynamics Advanced |
AP12RC2839-2 | Sensata Technologies Maryland, Inc |