NSN 5925-01-228-3033
Overload Switch
Multipole-single actuator type body style, metal case material, at 12 oclock nonturn device location, nonturn device width: 0.125 inches .
Manufacturer part number M39016-06-319 for national stock number 5925012283033.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-228-3033.
-
MPN or Model
M39016-06-319
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.3 lb -
Body Style
Multipole-single actuator type -
Bushing Length
Between 0.332 inches and 0.380 inches -
Body Length
1.562 inches -
Body Width
1.937 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
0.906 inches -
Center To Center Distance Between Terminals Parallel To Width
0.625 inches -
Nonturn Device Location
At 12 oclock -
Nonturn Device Radius
0.325 inches -
Nonturn Device Length
0.125 inches -
Nonturn Device Width
0.125 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.828 inches -
Pole Quantity
3 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Features Provided
High inrush protection -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
4.0 amperes ac all locations and 4.0 amperes dc all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations and 50.0 dc all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
500.0 ac all locations and 300.0 dc all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole two -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole three -
Trip Delay Time In Seconds Per Rated Continuous Current
0.500 at 200 pct all locations and 9.000 at 200 pct all locations -
Inclosure Protection Type For Which Designed
General purpose -
Switch Terminal Type
Pin -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
400.0 all locations -
Unpackaged Unit Weight
150.0 grams -
Test Data Document
81349-mil-c-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
6 wire hook -
Specification Data
81349-mil-c-39019/6 government specification
More from these suppliers
- 5905-00-005-2695 MPN RNC55J2491FMFilm Fixed Resistor
- 5905-00-006-6983 MPN RNC60K1872FRFilm Fixed Resistor
- 5905-00-006-9080 MPN RWR81S3920FPInductive Wire Wound Fixed Resistor
- 5905-00-007-7396 MPN RNC60C3011FSFilm Fixed Resistor
- 5905-00-008-6769 MPN MIL-R-39005/4Noninductive Wire Wound Fixed Resistor
- 5905-00-009-8047 MPN MILR10509-3Film Fixed Resistor
- 5905-00-024-0543 MPN RER75F3651PInductive Wire Wound Fixed Resistor
- 5905-00-032-8448 MPN RNC70H5000BSFilm Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-228-3033 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M39016-06-319 | Military Specifications |
M39019/06-319 | Military Specifications |
MIL-PRF-39019/6G | Military Specifications |
MIL-C-39019/6 | Military Specifications |
ASC1539012 | Asc Pty Ltd |