NSN 5925-01-311-8707
Overload Switch
Multipole-single actuator type body style, metal case material, at 3 oclock and at 9 oclock nonturn device location, switch contact arrangement: single pole, double throw.
Manufacturer part number AP-112-1RC-7-0-251 for national stock number 5925013118707.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-311-8707.
-
MPN or Model
AP-112-1RC-7-0-251
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
Body Style
Multipole-single actuator type -
Bushing Length
0.380 inches -
Body Length
1.500 inches -
Body Width
1.875 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
0.906 inches -
Center To Center Distance Between Terminals Parallel To Width
0.625 inches -
Nonturn Device Location
At 3 oclock and at 9 oclock -
Nonturn Device Radius
0.625 inches -
Nonturn Device Length
0.130 inches -
Nonturn Device Diameter
0.140 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
1.780 inches -
Pole Quantity
3 -
Arc Quenching Method
Magnetic blowout -
Mounting Facility Type And Quantity
1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Special Handling Feature
Magnetic -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
250.0 milliamperes ac all locations and 250.0 milliamperes dc all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations and 50.0 dc all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
300.0 ac all locations and 500.0 dc all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
150.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole two -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.375 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.130 at 200 pct all locations and 1.300 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Hermetically sealed -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
0.5 ac and 0.5 dc -
Switch Voltage Rating And Type In Volts
120.0 ac and 50.0 dc -
Frequency In Hertz
400.0 all locations -
Test Data Document
81349-mil-c-39019 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unef -
Terminal Type And Quantity
6 wire hook -
Specification Data
81349-mil-c-39019/6 government specification
More from these suppliers
- 5905-00-001-2842 MPN RB18CE49R90FNoninductive Wire Wound Fixed Resistor
- 5905-00-004-6053 MPN RER60F1580RInductive Wire Wound Fixed Resistor
- 5905-00-005-2900 MPN MILR10509-8Film Fixed Resistor
- 5905-00-005-3144 MPN RWR81SR590FRInductive Wire Wound Fixed Resistor
- 5905-00-006-7050 MPN RNR70C3651FPFilm Fixed Resistor
- 5905-00-007-7258 MPN MIL-R-22097/4Nonprecision Nonwire Wound Variable Resistor
- 5905-00-009-6336 MPN RLR42C47R0GMFilm Fixed Resistor
- 1560-00-037-1458 MPN MIL-STD-129Engine Cont Power Plant Terminal
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
![Mechanic Bill explains Overload Switch](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5925-01-311-8707 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AP-112-1RC-7-0-251 | Sensata Technologies Maryland, Inc |
X24-310-724 | Bofors Ab |
M39019/06-206 | Military Specifications |
MIL-C-39019/6 | Military Specifications |
Stock Check
![](/public/images/partscage_shelf3.png)