NSN 5925-01-357-7024
Overload Switch
Multipole-single actuator type body style, plastic case material, single pole, double throw switch contact arrangement, fragility factor: moderately rugged.
Manufacturer part number M55629/21UMUM for national stock number 5925013577024.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-357-7024.
-
MPN or Model
M55629/21UMUM
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.5 lb -
Body Style
Multipole-single actuator type -
Bushing Length
Between 0.115 inches and 0.145 inches -
Body Length
2.000 inches -
Body Width
1.515 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
1.530 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.735 inches and 0.765 inches -
Switch Contact Arrangement
Single pole, double throw -
Fragility Factor
Moderately rugged -
Mounting Surface To Terminal End Distance
2.232 inches -
Pole Quantity
2 -
Mounting Facility Type And Quantity
2 threaded hole and 1 threaded bushing w/panel seal -
Storage Type
General purpose warehouse -
Special Handling Feature
Fragile -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
30.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
2000.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
125.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
1 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At pole two -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.138 inches and 0.500 inches -
Switch Location And Position Designation
Internal at pole two -
Trip Delay Time In Seconds Per Rated Continuous Current
3.000 at 200 pct all locations and 20.000 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Fungus resistant -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
10.0 ac and 1.0 dc -
Switch Voltage Rating And Type In Volts
250.0 ac and 50.0 dc -
Frequency In Hertz
60.0 all locations -
Test Data Document
81349-mil-c-55926 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc and un -
Terminal Type And Quantity
4 tab w/screw -
Specification Data
81349-mil-c-55629/21 government specification
More from these suppliers
- 5905-00-001-2814 MPN RNR60E3010FPFilm Fixed Resistor
- 5935-00-001-3165 MPN M81511/01EF02P2Electrical Receptacle Connector
- 5905-00-003-5787 MPN RWR89S1911FPInductive Wire Wound Fixed Resistor
- 5905-00-003-7715 MPN RLR05C12R0GMFilm Fixed Resistor
- 5905-00-005-2867 MPN RCR42G153JSComposition Fixed Resistor
- 5935-00-006-5425 MPN MILC83723-21Electrical Receptacle Connector
- 5905-00-007-9138 MPN RBR71L27101FRNoninductive Wire Wound Fixed Resistor
- 5905-00-009-8032 MPN RNC60H7681CSFilm Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-357-7024 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |
M55629/21UMUM | Military Specifications |
MIL-C-55629/21 | Military Specifications |