NSN 5925-01-414-4675
Overload Switch
Multipole-multiple actuator type body style, metal case material, single pole, double throw switch contact arrangement, pole quantity: 3.
Manufacturer part number M55629/6-390 for national stock number 5925014144675.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-414-4675.
-
MPN or Model
M55629/6-390
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Body Style
Multipole-multiple actuator type -
Body Length
2.510 inches -
Body Width
Between 2.205 inches and 2.285 inches -
Case Material
Metal -
Center To Center Distance Between Terminals Parallel To Length
Between 1.660 inches and 1.960 inches -
Center To Center Distance Between Terminals Parallel To Width
0.750 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
Between 2.046 inches and 2.078 inches -
Switch Contact Arrangement
Single pole, double throw -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.750 inches -
Boss Height
0.140 inches -
Mounting Surface To Terminal End Distance
2.553 inches -
Pole Quantity
3 -
Mounting Facility Type And Quantity
6 threaded hole -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
20.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
150.0 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
3 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At each pole -
External Actuator Linkage Arrangement
One, two, and three linked -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.138 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
20.000 at 200 pct all locations and 160.000 at 200 pct all locations -
Inclosure Protection Type For Which Designed
Fungus resistant -
Switch Terminal Type
Tab, solder lug -
Switch Current Rating And Type In Amps
10.0 ac and 2.0 dc -
Switch Voltage Rating And Type In Volts
250.0 ac and 50.0 dc -
Frequency In Hertz
400.0 all locations -
Test Data Document
81349-mil-c-55629 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Terminal Type And Quantity
6 threaded stud -
Specification Data
81349-mil-c-55629/6 government specification
More from these suppliers
- 5905-00-001-2847 MPN RV2LAYSD753CNonprecision Nonwire Wound Variable Resistor
- 5905-00-001-2870 MPN MILR22-3Nonprecision Wire Wound Variable Resistor
- 5905-00-005-3369 MPN RCR20G392JRComposition Fixed Resistor
- 5905-00-006-2987 MPN RNC60H6651FMFilm Fixed Resistor
- 5935-00-006-5653 MPN MIL-C-38999Electrical Plug Connector
- 5935-00-008-8268 MPN MIL-C-38999Electrical Receptacle Connector
- 5905-00-009-2982 MPN RNC70K3011FPFilm Fixed Resistor
- 5935-00-026-9571 MPN M28748/5E00S1AElectrical Plug Connector
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-414-4675 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M55629/6-390 | Military Specifications |
MIL-PRF-55629 | Military Specifications |
MIL-C-55629/6 | Military Specifications |