NSN 5925-01-497-1928
Overload Switch
Circuit breaker has three pole, single throw normally open switch contact arrangement; mount in vertical plane.
Manufacturer part number M55629/17CQCQCQ for national stock number 5925014971928.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-497-1928.
-
MPN or Model
M55629/17CQCQCQ
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Body Style
Multipole-multiple actuator type -
Body Length
5.125 inches -
Body Width
3.108 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
Between 3.480 inches and 3.614 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.996 inches and 1.056 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.750 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.026 inches -
End Application
Weapon launch console assembly for losangeles class submarine 688 -
Boss Height
0.220 inches -
Mounting Surface To Terminal End Distance
Between 3.460 inches and 3.580 inches -
Pole Quantity
3 -
Mounting Facility Type And Quantity
6 threaded hole -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
5.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
50.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
1000.0 all locations -
Ultimate Trip Time Per Pole In Seconds
0.800 all locations and 7.000 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
3 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At each pole -
External Actuator Linkage Arrangement
One, two, and three linked -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.138 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.150 at 200 pct all locations and 1.000 at 200 pct all locations and 0.032 at 400 pct all locations and 0.250 at 400 pct all locations and 0.110 at 800 pct all locations -
Inclosure Protection Type For Which Designed
Fungus resistant and moisture resistant and salt water resistant -
Switch Terminal Type
Pin -
Switch Current Rating And Type In Amps
5.0 ac and 1.0 dc -
Switch Voltage Rating And Type In Volts
250.0 ac and 50.0 dc -
Frequency In Hertz
60.0 all locations -
Test Data Document
81349-mil-c-55629 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Terminal Type And Quantity
6 threaded stud -
Specification Data
81349-mil-c-55629/17 government specification
More from these suppliers
- 4820-00-415-9719 MPN 82215S61-221PC18Valve Piston
- 5945-00-501-6179 MPN 658851-1Electromagnetic Relay
- 5935-00-563-2293 MPN 3179717-0001Tip Jack
- 4820-01-057-3218 MPN SS845-2181483ASCheck Valve
- 4820-01-063-0075 MPN 541-5182933Valve Seat
- 4820-01-121-2898 MPN 501-4675698 ITEM 9Valve Drum
- 5905-01-150-4503 MPN 3255387-36Film Fixed Resistor
- 5905-01-155-9750 MPN 5529218-24Film Fixed Resistor
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-497-1928 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M55629/17CQCQCQ | Military Specifications |
MIL-C-55629/17 | Military Specifications |
462-7068566-99 | Naval Sea Systems Command |
H851-2001-99 | Electric Boat Corporation |
7068566 | Naval Sea Systems Command |