NSN 5925-01-497-1932
Overload Switch
Circuit breaker has three pole, single throw normally open switch contact arrangement; mount in vertical plane.
Manufacturer part number M55629/17QQQQQQ for national stock number 5925014971932.
Datasheet
-
Product description
Circuit Breaker NSN 5925-01-497-1932.
-
MPN or Model
M55629/17QQQQQQ
-
Schedule B
8536.20.0040 (Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Body Style
Multipole-multiple actuator type -
Body Length
5.125 inches -
Body Width
3.108 inches -
Case Material
Plastic -
Center To Center Distance Between Terminals Parallel To Length
Between 3.480 inches and 3.614 inches -
Center To Center Distance Between Terminals Parallel To Width
Between 0.996 inches and 1.056 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.750 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.026 inches -
End Application
Weapon launch console assembly for losangeles class submarine 688 -
Boss Height
0.220 inches -
Mounting Surface To Terminal End Distance
Between 3.460 inches and 3.580 inches -
Pole Quantity
3 -
Mounting Facility Type And Quantity
6 threaded hole -
Thready Qty Per Inch (tpi)
32 -
Maximum Continuous Load Current Rating Per Pole
100.0 amperes ac all locations -
Operating Voltage Type And Rating Per Pole In Volts
240.0 ac all locations -
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
1000.0 ac all locations -
Circuit Protection Type
Overcurrent all locations -
Trip Release Method
Magnetic all locations -
Trip Release Characteristic
Time delay all locations -
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
1000.0 all locations -
Ultimate Trip Time Per Pole In Seconds
0.800 all locations and 7.000 all locations -
Reset Method
Manual -
Main Contact Tripping Mechanism Type
Trip free -
Manual Actuator Type And Quantity
3 toggle -
Actuator Function
Trip-reset -
Actuator Position Designation
At each pole -
External Actuator Linkage Arrangement
One, two, and three linked -
Auxiliary Switch Function And Quantity
1 alarm -
Internal Trip Release Configuration
Series trip all locations -
Thread Size
0.138 inches -
Switch Location And Position Designation
Internal at pole one -
Trip Delay Time In Seconds Per Rated Continuous Current
0.150 at 200 pct all locations and 1.000 at 200 pct all locations and 0.032 at 400 pct all locations and 0.250 at 400 pct all locations and 0.110 at 800 pct all locations -
Inclosure Protection Type For Which Designed
Fungus resistant and moisture resistant and salt water resistant -
Switch Terminal Type
Pin -
Switch Current Rating And Type In Amps
5.0 ac and 1.0 dc -
Switch Voltage Rating And Type In Volts
250.0 ac and 50.0 dc -
Frequency In Hertz
60.0 all locations -
Test Data Document
81349-mil-c-55629 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Terminal Type And Quantity
6 threaded stud -
Specification Data
81349-mil-c-55629/17 government specification
More from these suppliers
- 5940-00-177-7925 MPN 3148450-9Lug Terminal
- 4820-00-186-3837 MPN 810-4384536Angle Valve
- 4820-00-200-9058 MPN 803-5001003-X7X1Valve Seat
- 4820-00-246-4986 MPN 803-5001003-X3X1-04Valve Seat
- 4820-00-371-8898 MPN 320-4801-799460REV 4 PIECE V3Plug Valve
- 5940-00-764-1028 MPN SE12XC09Stud Terminal
- 5935-00-808-7620 MPN 1667928-32Electrical Receptacle Connector
- 5935-00-943-6734 MPN 1877961-09Electrical Plug Connector
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller.
Pricing and Availability
Get a quote for 5925-01-497-1932 circuit breakerManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M55629/17QQQQQQ | Military Specifications |
MIL-C-55629/17 | Military Specifications |
462-7068566-104 | Naval Sea Systems Command |
H851-2001-104 | Electric Boat Corporation |
7068566 | Naval Sea Systems Command |