NSN 5935-00-901-5782
Electrical Connector
Straight shape, external coupling body style, moisture resistant and vibration resistant and salt water resistant environmental protection, 0.719 inches center to center distance between mounting facilities parallel to height, distance from mounting shoulder to front face: between 0.431 inches and 0.462 inches .
Manufacturer part number MS3112E10-6P for national stock number 5935009015782.
Datasheet
-
Product description
Electrical Receptacle Connector NSN 5935-00-901-5782.
-
MPN or Model
MS3112E10-6P
-
Schedule B
8538.90.7080 (Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi) -
NMF (National Motor Freight)
061680 - Elec Wiring Plugs Etc -
Unit Weight (Est.)
0.1 lb -
Body Style
Straight shape, external coupling -
Overall Length
0.978 inches -
Overall Height
0.934 inches -
Overall Width
0.934 inches -
Environmental Protection
Moisture resistant and vibration resistant and salt water resistant -
Unthreaded Mounting Hole Diameter
Between 0.115 inches and 0.125 inches -
Center To Center Distance Between Mounting Facilities Parallel To Height
0.719 inches -
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.719 inches -
Distance From Mounting Shoulder To Front Face
Between 0.431 inches and 0.462 inches -
Mating End Quantity
1 -
Contact Position Arrangement Style
6-oct single mating end -
Contact Removability
Nonremovable single mating end single contact grouping -
Contact Maximum Ac Voltage Rating In Volts
600.0 single mating end single contact grouping -
Polarization Method
Keyway or multiple keyway -
Insert Position In Deg
0.0 -
Shell Type
Solid -
Connector Locking Method
Bayonet pin -
Terminal Location
Back single mating end single contact grouping -
Contact Surface Treatment
Gold single mating end single contact grouping and copper single mating end single contact grouping -
Terminal Type
Solder well single mating end single contact grouping -
Shell Material
Aluminum alloy -
Shell Surface Treatment
Cadmium -
Shell Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Included Contact Quantity
6 single mating end single contact grouping -
Included Contact Type
Round pin single mating end single contact grouping -
Precious Material And Location
Contact surfaces gold -
Precious Material And Weight
0.030 gold grains, troy -
Precious Material
Gold -
Test Data Document
81349-mil-c-26482 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Specification Data
81349-mil-c-26482 government specification
More from these suppliers
- 5985-00-080-1382 MPN 723398-004Electrical Dummy Load
- 5905-00-106-9345 MPN 5120-201Composition Fixed Resistor
- 5945-00-165-2506 MPN 4170848-049Thermal Relay
- 5935-00-419-3709 MPN 712288-317Electrical Plug Connector
- 5905-00-484-0285 MPN 4171306-890Composition Fixed Resistor
- 5905-00-687-0002 MPN 4171381-21Composition Fixed Resistor
- 5905-00-727-5346 MPN 4171402-727Film Fixed Resistor
- 5930-00-785-8546 MPN 5197-44Push Switch
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly, electrical. For items without inserts, see shell, electrical connector.
Pricing and Availability
Get a quote for 5935-00-901-5782 electrical receptacle connectorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3112E10-6P | Military Specifications |
MS3112E-10-06PN | Military Standards |
MS3112E10-6P | Military Standards |
MILC26482 | Military Specifications |
907D251-14 | Hamilton Sundstrand Corporation |
5L4541-004-44 | Airbus Defence And Space Gmbh |
5M4541-222-24 | Airbus Defence And Space Gmbh |
289303100110 | Leonardo S.p.a. - Airborne & Space |
MS3112E10-6P | Itt Cannon Gmbh |
W41256D6101B10 | Airbus Defence And Space |
416792-50 | Raytheon Company |
061-45472 | Moog Inc. |
CE213240 | National Security Agency |
PT02A-10-6P | Amphenol Corporation |
371-2016-000 | Rockwell Collins, Inc. |
371-2166-000 | Rockwell Collins, Inc. |
4118836-048 | Raytheon Company |
4118836-48 | Raytheon Company |
PT024A-10-6P | Amphenol Corporation |
1203-09 | Allard Nazarian Group, Inc. |
1593528712B | Leonardo S.p.a. - Airborne & Space |
PT02A10-6P | Amphenol-tuchel Electronics Gmbh |
907D251-14 | Sundstrand Corp |
289303100110 | Alenia Difesa Spa Divisione Sistemi |
MIL-DTL-26482 | Military Specifications |