NSN 5935-01-258-5403
Coaxial Plug
Angle shape w/cable clamp body style, 90.0 body angle in deg, moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof environmental protection, contact maximum current rating in amps: 135.0 single mating end single contact grouping.
Manufacturer part number MS3408DJ32B17S for national stock number 5935012585403.
Datasheet
-
Product description
Electrical Plug Connector NSN 5935-01-258-5403.
-
MPN or Model
MS3408DJ32B17S
-
Schedule B
8536.69.5050 (Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi) -
NMF (National Motor Freight)
061680 - Elec Wiring Plugs Etc -
Unit Weight (Est.)
1.1 lb -
Thread Class
2b -
Thread Direction
Right-hand -
Body Style
Angle shape w/cable clamp -
Overall Diameter
2.219 inches -
Body Angle In Deg
90.0 -
Environmental Protection
Moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof -
Cable Entrance Diameter
Between 0.875 inches and 1.250 inches -
Threaded Device Type
Coupling facility -
Mating End Quantity
1 -
Contact Position Arrangement Style
32-17 single mating end -
Contact Removability
Removable single mating end single contact grouping -
Contact Maximum Current Rating In Amps
135.0 single mating end single contact grouping -
Contact Maximum Ac Voltage Rating In Volts
900.0 single mating end single contact grouping -
Contact Maximum Dc Voltage Rating In Volts
1250.0 single mating end single contact grouping -
Polarization Method
Key, multiple key groove -
Insert Position In Deg
0.0 -
Shell Type
Solid -
Connector Locking Method
Bayonet pin -
Connector Cable Strain Relief Method
Cable clamp -
Distance From Centerline To Connector End
3.500 inches -
Distance From Centerline To Cable End
4.312 inches -
Thread Length
0.664 inches -
Operating Tempurature Rating
Between -55.0 degrees celsius and 175.0 degrees celsius -
Thready Qty Per Inch (tpi)
18 -
Thread Size
2.000 inches -
Terminal Location
Back single mating end single contact grouping -
Contact Material
Copper alloy single mating end single contact grouping -
Contact Surface Treatment
Silver single mating end single contact grouping -
Insert Material
Rubber silicone class q single mating end -
Contact Surface Treatment Specification
Qq-s-365 federal specification single treatment response single mating end single contact grouping -
Terminal Type
Crimp single mating end single contact grouping -
Shell Material
Aluminum -
Shell Surface Treatment
Cadmium and chromate and nickel -
Shell Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response and qq-p-416, type 2, cl 3 federal specification 2nd treatment response -
Included Contact Quantity
4 single mating end single contact grouping -
Included Contact Type
Round socket single mating end single contact grouping -
Precious Material And Location
Contact surfaces silver -
Precious Material And Weight
0.020 silver grains, troy -
Precious Material
Silver -
Test Data Document
81349-mil-c-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Uns -
Specification Data
96906-ms3408 government standard
More from these suppliers
- 5935-00-072-0082 MPN 10-214214-6SElectrical Receptacle Connector
- 5950-00-646-1432 MPN L217338-1Power Transformer
- 5905-00-001-7334 MPN RNC60J2001BMFilm Fixed Resistor
- 5905-00-004-6057 MPN RE65G3900Inductive Wire Wound Fixed Resistor
- 5905-00-004-6100 MPN RNC60J9761FPFilm Fixed Resistor
- 5905-00-006-5484 MPN MIL-R-39005/4Noninductive Wire Wound Fixed Resistor
- 5905-00-006-6944 MPN MILR55182-6Film Fixed Resistor
- 5905-00-007-7402 MPN RNR65C2322FSFilm Fixed Resistor
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.
![Mechanic Bill explains Coaxial Plug](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5935-01-258-5403 electrical plug connectorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
MS3408DJ32B17S | Bendix Corp The |
MS3408DJ32B-17S | Military Standards |
MIL-C-5015 | Military Specifications |
Stock Check
![](/public/images/partscage_shelf3.png)