NSN 5975-01-117-3265
Electrical Conduit Elbow
0.312 inches second end inside diameter, 45.0 degrees deflection angle, any acceptable single end conduit type accommodated, end type: internal thread second end.
Manufacturer part number 202M010-19B for national stock number 5975011173265.
Datasheet
-
Product description
Electrical Conduit Elbow NSN 5975-01-117-3265.
-
MPN or Model
202M010-19B
-
Schedule B
7609.00.0000 (Aluminum tube or pipe fittings (couplings, elbows sleeves)) -
NMF (National Motor Freight)
061680 - Elec Wiring Plugs Etc Sub2 -
Inside Diameter
0.312 inches second end -
Deflection Angle
45.0 degrees -
Conduit Type Accommodated
Any acceptable single end -
End Type
Internal thread second end -
Leg End To Plane Of Bend Distance
0.479 inches first end -
Material
Aluminum alloy 6061 -
Style Designator
Compression
More from these suppliers
- 5935-01-240-7541 MPN 204M016-19B1612Electrical Connector Backshell
- 5975-01-267-4234 MPN 222D132-3Dust And Moisture Seal Boot
- 5935-01-407-5364 MPN 5418-12-441016Electrical Connector Backshell
- 5935-01-426-0670 MPN TXR41AB90-1814A1Electrical Connector Backshell
- 5935-01-447-8941 MPN TXR21AB00-2214AIElectrical Connector Backshell
- 5940-01-527-7617 MPN SGRP-1Conductor Splice
- 5935-01-552-7197 MPN HEX40-AB-00-13-A3-3Electrical Connector Backshell
- 5935-01-451-4823 MPN HEX54-AB-00-15-A5-1Electrical Connector Backshell
An item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see entrance elbow, electrical. For items with one end having a male thread with a boss or shoulder, see box connector, electrical. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see entrance elbow, electrical. For items fabricated in the form of an elbow having both ends threaded male, see bend, electrical conduit.
Pricing and Availability
Get a quote for 5975-01-117-3265 electrical conduit elbowManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
202M010-19B | Tyco Electronics Corporation |
12311902-3 | U S Army Tank Automotive Command |
12311902-3 | Drs Sustainment Systems, Inc. |