NSN 5975-01-436-2766
Electrical Conduit Elbow
90.0 degrees deflection angle, any acceptable second end conduit type accommodated, internal thread first end end type, leg end to plane of bend distance: 4.000 inches second end.
Manufacturer part number LMFL90-200 for national stock number 5975014362766.
Datasheet
-
Product description
Electrical Conduit Elbow NSN 5975-01-436-2766.
-
MPN or Model
LMFL90-200
-
Schedule B
7307.92.9000 (Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes) -
NMF (National Motor Freight)
156643 - Plastic/rubr Bends Elbows/sweeps -
Deflection Angle
90.0 degrees -
Conduit Type Accommodated
Any acceptable second end -
End Type
Internal thread first end -
Leg End To Plane Of Bend Distance
4.000 inches second end -
Material
Iron malleable -
Style Designator
Standard
More from these suppliers
- 5975-00-437-7854 MPN TWLL100LElectrical Box Connector
- 5905-00-233-7451 MPN 247ASC0490-007Inductive Wire Wound Fixed Resistor
- 5985-00-988-0616 MPN 1563051Radio Frequency Reflection Isolator
- 5905-01-024-9084 MPN 247AS-C1324-001Film Fixed Resistor
- 4820-01-093-6003 MPN 1212AS214-2Safety Relief Valve
- 4920-01-196-9917 MPN 1314AS112-1Dynamometer Indicator
- 5935-01-229-4520 MPN 1395AS379-4Electrical Connector Backshell
- 5935-01-237-0077 MPN 642AS0757-2Electrical Plug Connector
An item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see entrance elbow, electrical. For items with one end having a male thread with a boss or shoulder, see box connector, electrical. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see entrance elbow, electrical. For items fabricated in the form of an elbow having both ends threaded male, see bend, electrical conduit.
Pricing and Availability
Get a quote for 5975-01-436-2766 electrical conduit elbowManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LMFL90-200 | Egs Electrical Group |
LMFL90-200 | Appleton Electric Co |
1764AS331-5 | Naval Air Systems Command |