NSN 6105-00-538-9235
Servomotor
About this product
Power take off shaft has a plastic lug.
Manufacturer part number 506-0892-002 for national stock number 6105005389235.
Datasheet
-
Product description
Control Motor NSN 6105-00-538-9235.
-
MPN or Model
506-0892-002
-
Schedule B
8412.80.9000 (Engines and motors, nesoi) -
NMF (National Motor Freight)
062120 - Generators/motors/parts NOI Sub1 -
Overall Height
1.375 inches -
Overall Length
1.469 inches -
Overall Width
0.938 inches -
Shaft Diameter
0.1250 inches single end -
Current Type
Ac input -
Mounting Method
Flange -
Mounting Facility Type And Quantity
2 unthreaded hole -
Control Field Impedance Rating In Ohms
150.0 -
Control Field Winding Type
Two windings, parallel connected -
Current Rating Method
No load -
Torque Rating And Type
0.1 inch-ounces stalled -
Inclosure Specificationification
Commercial -
Control Field Voltage Type And Rating In Volts
18.0 ac -
Features Provided
Horizontal mounting position and vertical mounting position -
Length Of Shaft From Housing
0.281 inches single end -
Tempurature Rating
-55.0 operating degrees celsius and 85.0 operating degrees celsius -
Rotor Speed Rating In Rpm
10000.0 single no load -
Connection Type And Voltage Rating In Volts
18.0 line to neutral single input -
Shaft End Characteristic
A1 single style single end -
Phase
Single input -
Frequency In Hertz
400.0 input
More from these suppliers
- 5945-00-086-8775 MPN 402-0363-00Motor Driven Relay
- 5950-00-118-8123 MPN 278-2108-010Radio Frequency Transformer
- 5905-00-131-5807 MPN 705-2179-000Film Fixed Resistor
- 5930-00-132-2629 MPN 259-2471-050Rotary Switch
- 5950-00-133-5271 MPN 240-1786-000Radio Frequency Coil
- 1680-00-173-3372 MPN 796-9149-001Electrical Cable Assembly
- 5905-00-175-5401 MPN 710-1100-20Inductive Wire Wound Fixed Resistor
- 5905-00-205-9020 MPN 705-1499-710Film Fixed Resistor
Control Motor
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
Pricing and Availability
Get a quote for 6105-00-538-9235 control motorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
506-0892-002 | Rockwell Collins, Inc. |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.